Products

Integrated Installation Kit

RPK5-GM4102
Chevrolet Camaro Integrated Radio Replacement Kit With HVAC Knobs
  • Works in all 2010-2015 Camaros, with or without MyLink factory radio.
  • Does not retain factory satellite radio.
  • PAC-UP required to configure vehicle settings.

RPK5-GM4102

Integrated Installation Kit

Installation Instructions

It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, download and install "PAC-UP Interface Updater". This will install the necessary software to update the firmware on the RP Interface. This can be found at in the "Download" tab at the very bottom of the firmware list on this page.
  • Download the firmware file to a location on your computer that you can easily find.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Click the "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, disconnect the PAC-UP from the computer, restart the software, then reconnect the PAC-UP and try again.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second from last digit of the revision number on your module matches the second from last digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 3.2.2.8 (Released on July 1st, 2019)
    Release Notes
    ***No download available, harness update only***
    • Changed RP5RADPWRAUDIO-HAR to GM-RAD-HAR. Harness includes the following updates:
      • Shortened chime cable
      • Removed blue power antenna input
      • Extended harness length by 2"
      • Removed constant 12v and ground connections from relay to module
    Download
  • Firmware Download, Version 2.2.2.8 (Released on June 1st, 2019)
    Release Notes
    ***No download available, harness update only***
    • RP5RADPWRAUDIO-HAR modification to fix accessory drop out issue
    Download
  • Firmware Download, Version 8 (Released on September 27th, 2017)
    Release Notes
    • Fixes incorrect celsius display
    • This firmware is for the HVAC board in the dash kit
    Download
  • Firmware Download, Version 6 (Released on July 3rd, 2017)
    Release Notes
    • Fixes issues seen with HVAC board becoming inoperable
    • This firmware is for the HVAC board in the dash kit
    Download
  • Firmware Download, Version 1.5.6.3 (Released on October 12th, 2016)
    Release Notes
    • Fixes issues seen with remapping SWC
    • This firmware is for the RP5 interface
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    • PAC-UP Interface Updater Application
    • Software used to update RP5 interface
    Download
  • Utility/Other, Version 11 (Released on July 3rd, 2017)
    Release Notes
    • RadioPRO PC Application
    • Software used to update HVAC board in dash kit
    Download
  • Utility/Other, Version 2.0.8 (Released on October 12th, 2016)
    Release Notes

    PAC Vehicle Settings App (PC)

    Software designed to change the vehicle settings directly from a PC. A PAC-UP interface is required to use this software.

    Download
Easily upgrade the radio in a 2010 - 2015 Chevrolet Camaro without losing OnStar and other factory features.

The RPK5-GM4102 comes with everything you need for a complete radio installation in any configuration of 2010-2015 Camaro - with or without OE navigation radio, OnStar, or factory amplification.

Includes a factory fit and finish dash kit, complete with climate control knobs, radio replacement interface to keep the vehicle’s built-in features, Aux-audio and USB retention harnesses, Exterior temperature display, and an antenna adapter.

Key Features
  • Retains factory climate control functions with included knobs and inserts
  • Retains OnStar functionality
  • Retains steering wheel control functions
  • Retains amplified audio system (if equipped)
  • All warning chimes to include front and rear parking sensors
  • Heads-Up Display
    • Keeps Heads Up Display functional, does not retain the ability to see audio info in this display.
  • Retains external temperature display feature
  • Retains factory USB port and aux audio input
  • Retains hazard switch function
  • Retains door lock switch functions
  • Factory-matched radio installation dash kit
  • Accommodates Single-DIN or double-DIN aftermarket radios
  • Displays temperature in Celsius and Fahrenheit



Patent # 8014540 & 8184825

Design Patent # D804465

Patent Pending

RPK5-GM4102 Instruction Manual
 Download (3.73M)
RPA-KNOB1 Tech Brief
Proper installation of center inserts of RPA-KNOB1
 Download (391.23k)
Loss of Accessory Power
Tech bulletin for no accessory power output - Bypassing the module with the speaker wires. This tech brief only applies to modules that are blue.
 Download (1.63M)