Products

RadioPRO3 Interface for Select GM Class II Vehicles

$119.95 RP3-GM11

Class 2

RP3-GM11

RadioPRO3 Interface for Select GM Class II Vehicles

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 1.1.7.5 (Released on January 19th, 2017)
    Release Notes
    • Adds support for the SWI-CP2
    Download
  • Firmware Download, Version 1.1.7.3 (Released on December 6th, 2013)
    Release Notes
    • Initial Release
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download


Radio Replacement Interface for GM Vehicles with Class II databus and 24-pin harness.

  • High current 10A accessory output
  • Data controlled outputs for connection to your navigation radio; speed, reverse and E-brake status output wires
  • Retains factory installed amplifier (standard & premium)
  • Data controlled RAP accessory output
  • Keeps vehicle data bus intact for service
  • Plug-in-connection for steering wheel control module (SWI-RC or SWI-X)
  • In package updatable using the PAC-UP
  • Adjustable chime volume: 4 levels, and off


Product Revision History

Current Revision #: 1.1.7.3    Description: Initial Release    Date Released: 12-6-13

RP3-GM11 Instruction Manual
 Download (245.15k)