Products

Can't find what you're looking for?

Submit a Request

THANK YOU!

If we do not have a product listed for a vehicle application you need, let us know and we will check to see if we can provide you with a solution.

Backup Camera/Navigation Unlock Interface
Backup Camera/Navigation Unlock Interface

Backup Camera/Navigation Unlock Interface

$359.00 BCI-CH21

For Select Chrysler/Dodge/Jeep/RAM vehicles


BCI-CH21

Backup Camera/Navigation Unlock Interface

  1. If this is the first time using the BCI PC Application, download “BCI PC Application".
  2. Download the firmware file.
  3. Extract the BCI PC Application file, then run the installer. This will install the PC Application onto the computer.
  4. Open the BCI PC Application using the new shortcut created on your desktop.
  5. Connect the interface to the computer using a standard to micro USB cable.
  6. Click the "Firmware" icon.
  7. Click “Select File” and browse to the new firmware file. The new firmware can be found where you saved it before beginning.
  8. Once the file is chosen the update will begin. When successful it will show the text "Update Completed".
  • Firmware Download, Version 1.1.1.9 (Released on June 28th, 2017)
    Release Notes

    New Features

    -Added BCI App support for:

    ---Front Camera Control

    ---Rear Camera Control

    ---Programmable Outputs 1, 2, 3

    ---New programmable outputs provide control of other accessories

    -Added “On-Demand Activation”

    -Added a reset, push and hold for 5s

    -Updated LED Operation

    Fixes

    -Audio cutting out when manually activating reverse camera when using Uconnect “USB, BT” to listen to audio

    Download
  • Firmware Download, Version 1.1.1.6 (Released on September 1st, 2016)
    Release Notes
    Adds VS41 support for Blind Spot and Front Cameras
    Download
  • Firmware Download, Version 1.1.2 (Released on August 10th, 2015)
    Release Notes
    Initial Release
    Download
  • Utility/Other, Version V6 (Released on November 21st, 2017)
    Release Notes
    BCI PC Application
    Download

The BCI-CH21 is a plug-and-play kit that allows you to easily add a back- up camera to select Chrysler, Dodge, and Jeep vehicles with CAN-Bus while retaining factory settings.  Ditch the wires and discover the simplicity of true plug-and-play. Disconnect the factory connector and connect our T-Harness inline. Use the dip switches bank to give your customers exactly what they need, turn on and off features for a truly customized installation.

Features

  • Adds reverse camera input
  • Unlocks navigation entry while the vehicle is in motion
  • A/V input capabilities
  • Provides VES activation
  • Works on all touchscreen radios (MyGig)
  • Works with a variety of EchoMaster backup cameras
BCI-CH21 Instruction Manual
Rev. 032317 ***Only applicable to revision 1.1.9 firmware or higher on BCI-CH21***
 Download (1.1M)
BCI-CH21 Instruction Manual
Rev. 090916 ***Only applicable to revision 1.1.6 firmware on BCI-CH21***
 Download (1.36M)
BCI-CH21 Instruction Manual
Rev. 051915 ***Only applicable to revision 1.1.2 firmware on BCI-CH21***
 Download (1.06M)